Explosion-proof connectors
Explosion-Proof Connectors in Saudi Arabia
ATEX and IECEx certified explosion-proof plugs, sockets, pins and termination tools for CCTV, telephone and signal cables in Zone 1 and Zone 2 hazardous areas. Stocked and supported by AJWASYS in Dammam for drilling rigs, refineries and plants across the Kingdom.
النسخة العربيةWhy buy explosion-proof connectors from AJWASYS
- Built for rig moves. Ex plugs and sockets let crews disconnect cameras and telephones for a rig move and reconnect them at the next location without re-terminating cables.
- Stock held in Dammam. Common connectors, replacement pins and tools are kept locally, so a damaged plug does not stop a camera or phone for weeks.
- Matched to our cameras and phones. We supply the connectors with our explosion-proof CCTV and telephone systems, so plug, cable and device are chosen together.
- Our engineers terminate them. Our team terminates, tests and replaces Ex connectors on site, and trains your technicians to do the same.
Our explosion-proof connector range

AJSYGC-EX4P10P(CE) Ex Connector Plug
ATEX and IECEx certified explosion-proof plug for field device cables in Zone 1 and Zone 2.
View model →
AJSYGCEX4S10R-M6(CE) Ex Connector Socket
ATEX and IECEx certified explosion-proof socket, the mating half of the AJSYGC plug.
View model →
AJSEXPC0974 ATEX Ex Plug
ATEX explosion-proof connector plug for CCTV and telephone cables on rigs and plants.
View model →
AJSEXSC0975 ATEX Ex Socket
ATEX explosion-proof connector socket, the mating half of the AJSEXPC0974 plug.
View model →
EXC31756P / EXC31758S Ex Connector Pins
Replacement male and female pins for terminating and repairing Ex connectors on site.
View model →
AJSZADL-07 Ex Aviation Connector
Explosion-proof circular aviation-type connector for camera and accessory wiring.
View model →See all explosion-proof connectors → Ex accessories Ex junction boxes Weatherproof RJ45 connectors
Tools for on-site termination
- AJSPR10PSS316 pin remover tool for removing pins from Ex plugs and receptacles without damaging the insert.
- AJSTOOL02CRMP ratcheting crimp tool for consistent, full-cycle crimps on connector pins.
- AJSZANXG explosion-proof flexible tube to protect cable runs between the connector and the device.
Plug and socket or cable gland: which do you need?
| Method | Best for | Trade-off |
|---|---|---|
| Ex plug and socket | Equipment that is moved or disconnected often: rig moves, temporary cameras, portable phones | Higher part cost, but fast disconnect and reconnect |
| Ex cable gland into a junction box | Fixed installations that stay in place for years | Lower part cost, but the box must be opened and re-terminated to disconnect |
| Weatherproof RJ45 connector | Network cameras and IP phones in safe outdoor areas, not hazardous zones | Not explosion-proof: use only outside classified areas |
Where our Ex connectors are used
- CCTV cameras on the drill floor, monkey board, mud pits and crane booms
- Explosion-proof telephones and paging speakers on rigs and plants
- Gas detection and alarm field devices
- Temporary and portable equipment that moves between sites
Frequently asked questions
What is an explosion-proof connector?
An explosion-proof (Ex) connector is a plug and socket built and certified so that connecting or disconnecting it cannot ignite gas or dust in a hazardous area. It lets cameras, telephones and other field devices be unplugged without opening a junction box or re-terminating the cable.
Why use Ex connectors on drilling rigs?
Land rigs are moved regularly. With Ex plugs and sockets on CCTV and telephone cables, the crew can disconnect equipment for the rig move and reconnect it at the new location quickly, keeping the hazardous-area protection intact.
Are your connectors ATEX and IECEx certified?
Our explosion-proof plugs and sockets carry ATEX certification, and the AJSYGC series carries both ATEX and IECEx. The certificate for each model is supplied with the order.
Do you supply the pins and tools?
Yes. We supply replacement male and female Ex connector pins, a pin remover tool and a ratcheting crimp tool, so your technicians can terminate and repair connectors on site.
How do I get a quotation?
Send us the model or a photo of the connector, the quantity and the site location through the contact page, by phone on +966 13 832 4949, or on WhatsApp. Our team replies within 24 hours.
Visit or contact AJWASYS
Showroom: 15th Street, King Saud Road, Dammam
Project office: Office 101, 1st Floor, Alshoflot Business Tower, King Saud Street, Dammam
Phone: +966 13 832 4949 Mobile / WhatsApp: +966 54 489 7999 Email: info@ajwasys.com
Need Ex equipment on site this month?
Tell us the zone, the quantity and the location. We reply with a quote within 24 hours.